VMFAT 101 Sharpshooters Custom Watch
$519.00
This watch comes standard with our Khaki Ballistic NYLON NATO strap and a silver buckle. If you want a different band, please let us know in the customer notes section.
If you would like a custom engraving, please add a “Custom Engraving” item to your cart and indicate your engraving request also in the customer notes section upon checkout.
$589.90 includes California Sales tax.
Out of stock
Built in the USA with the best parts sourced from around the world!
Movement: Swiss Ronda 5021.d
- Our “Ameri-chrono” watch, assembled in the USA using a high-end Swiss quartz chronograph movement.
2 positioned chronograph.
2 recessed sub-dials. 60 min. and 60 second.
Pull/Push crown used to set the time and date and to adjust chronograph settings.
Case: 44mm wide, 10.5mm thick 316 stainless steel.
- At 10.5mm, this watch has a sleek profile on your wrist, unlike many of the 44mm+ sized watches that look big and bulky.
- The case-back is screwed on and engraved separately from the watch to protect the movement from damage from the laser. This process is used in most high-end watches and leads to the caseback engraving not “lining up” with the watch.
- 316 stainless steel is the “go-to” steel for all high-end watches. It is a surgical grade stainless steel that finished with either a brushed or polished finish.
Hands: Proprietary “continuous curve” hands with subset luminescent markers on the minute and hour hands, as well as on the 2 sub-dials.
Strap: Genuine oil tanned leather, Nylon NATO, or tactical rubber.
- 22mm wide.
- Stainless steel hardware.
Sapphire Crystal Window: Used in most high-end watches, it provides a much higher scratch resistance than the more common mineral glass.
- Hardness of 9 on the Mohs scale.
- Only surpassed by diamond in terms of hardness.
- Sourced from Switzerland with an anti-reflective coating on the inside and outside of the crystal.
Water Resistance: By no means is this a diving watch, but it is water resistant to 100 meters (Note. Not water proof). Not recommended to spend a prolonged amount of time in the water, based on which strap you have.
Other internal components: Top and bottom rockers are 100% stainless steel, and they run through a stainless steel routing into the movement.
- A lot of cheaper watches will use a plastic router that breaks easily.
- The stainless steel adds an additional cost but increases the strength by an order of magnitude.
| Weight | 8 oz |
|---|---|
| Dimensions | 7 × 5 × 2 in |
Related products
