340th WS 39mm Squadron Watch
$540.00
Watch Case: PVD Black Stainless Steel with a beadblast finish
Band Options: This watch will come standard with one of our Padded stitched leather, Ballistic Nylon NATO straps or Tactical FKM Rubber bands. Make your selection below.
ADDITIONAL BANDS: If you want to purchase an additional band use promocode banddiscount22 to get 50% off on additional stitched leather, Nylon NATO or Tactical FKM Rubber bands.
Caseback Personalized Engraving: If you would like a personalized engraving on the back, please add the “Personalized Engraving” item to your order ($50) and indicate your engraving request in the order notes section during CHECKOUT of your order. We recommend a maximum of 12 characters but if you want more, we will reduce the font size to make it fit.
Caseback Orientation: Please note that the caseback “design” pictured in this gallery is oriented exactly in line with the watch face for presentation purposes only. During production, the caseback is a separate piece of the watch. When the casebacks are engraved with the airframe design, they are not attached to the rest of the case at that time. Since both the casebacks and cases are threaded separately, when the engraved caseback is then screwed onto the case, the final tightening point will result in the caseback design not being in the exact orientation in relation to the watch face. And there will be some variation from watch to watch.
SHIPPING: There will be a $14 shipping/insurance charge added to this order and delivery time is within 2 weeks of placing the order for domestic addresses.
In stock
Built with the best parts sourced from around the world.
Movement: Swiss Ronda 5021.d.
- Our “Americhrono” watch using a high-end Swiss chronograph movement.
- 2 positioned chronograph.
- 2 recessed sub-dials. 60 minute and 60 second.
- Pull/Push crown used to set the time/date and to adjust chronograph settings.
Case: 39mm wide, 9.5mm thick 316 stainless steel.
- The case-back is screwed on and engraved separately from watch to protect the movement from damage from the engraving laser. This process is used in most high-end watches and leads to the caseback engraving not “lining up” with the watch.
- 316 stainless steel is the “go-to” steel for all high-end watches. It is a surgical grade stainless steel that is finished with either a brushed or polished texture.
Hands: Proprietary “continuous curve” hands with subset luminescent markers on the minute and hour hands, as well as on the 2 sub-dials.
Strap: Choose from Genuine Oil Tanned leather, Nylon NATO, or Tactical Rubber.
- 22mm wide.
- Stainless Steel hardware.
Sapphire Crystal Window: Used in all luxury watches, it provides a much higher scratch resistance than the more common mineral glass.
- Hardness of 9 on the Mohs scale.
- Only surpassed by diamond in terms of hardness.
- Sourced from Switzerland with an anti-reflective coating on the inside and outside of the crystal.
Water Resistance: By no means is this a diving watch, but is it water resistant to 100 meters . Not recommended to spend a prolonged amount of time in the water.
Other internal components: Top and bottom rockers are 100% stainless steel, and they run through a stainless steel routing into the movement increasing the strength by an order of magnitude.
| Weight | 8 oz |
|---|---|
| Dimensions | 7 × 5 × 2 in |
Related products
